VCDX - Nugget -- Identify iSCSI, Fibre Channel
Storage – Create and Administer VMFS Datastores using advanced Techniques
Describe how to identify iSCSI, Fibre Channel, SATA and NFS configurations using CLI commands and log entries.
First, there are several commands relating to storage. Two of which I have discovered give me very useful information.
First is esxcfg-vmhbadevs
_[root@esxvdi01 log]# esxcfg-vmhbadevs -h
Print the mappings between vmhba names and /dev names
-m–vmfs Print mappings for VMFS volumes to their Service Console partitions and vmhba names.
-f–vfat Print mappings for VFAT volumes to their Service Console partitions and vmhba names.
-q–query Print mapping in 2.5 compatibility mode to mimic vmkpcidivy -q vmhba_devs.
-a–all Print all devices, regardless of whether they have console device or not.
-h–help Show this message.
The useful switch is the –m, this will also print the VMFS id for easy identification of the HBA, Service Console device path and the VMFS volume.
[root@esxvdi01 log]# esxcfg-vmhbadevs -m
**vmhba0:0:0:3 /dev/cciss/c0d0p3 48c64d26-b496c344-0a0f-001cc4be79c0
vmhba0:1:0:1 /dev/cciss/c0d1p1 48c64f2c-f4eb2f06-df8b-001cc4be79c0
Next is the command esxcfg-mpath
[root@SCG-PRESX3 root]# esxcfg-mpath -l
Disk vmhba1:0:1 /dev/sdc (1342249MB) has 2 paths and policy of Most Recently Used
FC 13:0.0 2100001b320b1e1f<->5006016030230c0d vmhba1:0:1 On active preferred
FC 15:0.0 2100001b320b6b31<->5006016830230c0d vmhba2:0:1 Standby
Disk vmhba1:0:2 /dev/sdd (2072576MB) has 2 paths and policy of Fixed
FC 13:0.0 2100001b320b1e1f<->5006016030230c0d vmhba1:0:2 Standby
FC 15:0.0 2100001b320b6b31<->5006016830230c0d vmhba2:0:2 On active preferred
Disk vmhba1:0:0 /dev/sdb (2072576MB) has 2 paths and policy of Fixed
FC 13:0.0 2100001b320b1e1f<->5006016030230c0d vmhba1:0:0 Standby
FC 15:0.0 2100001b320b6b31<->5006016830230c0d vmhba2:0:0 On active preferred
Disk vmhba0:0:0 /dev/sda (69376MB) has 1 paths and policy of Fixed
Local 1:0.0 vmhba0:0:0 On active preferred
This command is intended to supply multi-pathing information for the VMFS volumes. It additionally tells you the type of disk the service console device path the HBA identifier. I can see local, iSCSI, NFS, and Fibre Channel disk information from this command.
Any other commands to get this information? Let me know. As I (slowly) make my way into studying for the VCDX I hope to compile a big list